• Foundation-HI-e1600854426751-1-1920x800.jpg
    Foundation-HI-e1600854426751-1-1920x800.jpg
  • RD-6-scaled-e1599573677346-1-300x300.jpg
    RD-6-scaled-e1599573677346-1-300x300.jpg
  • Foundation-HI-e1600854426751-1-1920x800.jpg
  • RD-6-scaled-e1599573677346-1-300x300.jpg
Range produced to specified standards

Specified Granular Materials

Roadstone Specified Granular materials are produced at our quarry locations by means of blasting, crushing and screening into the required sizes. Roadstone Specified Granular materials produced at our Pit locations are extracted from the pit face by excavator and screened into the required sizes.

Materials may vary in maximum size and particle size distribution (grading) to suit the required applications and comply with the relevant specification. When producing these materials the aim is to always have a finished product which is clean, hard and durable and capable of performing as required in an engineering environment and in accordance with specification.

Contact us for sales or technical advice on this product

Specified Granular Materials

Contact us

Next steps

Checkout
Related Products
view more products
Description

These products have a wide range of required physical and chemical specification requirements depending on the end-use application. The main specifier of these products in Ireland is the Transport Infrastructure Ireland whom sets out each materials requirement in their Specification for Road Work Series 500,600 &800. Series 500 deals with Drainage and Pipe bedding materials, Series 600 with Earthworks materials and Series 800 with Sub-base materials.

Granular Fill material for use under concrete floors and footpaths is specified under Annex E of S.R. 21, which lists the physical, chemical and petrographic requirements of the material. This specification is aimed specifically at granular fill for use under concrete.

Production is managed under our ISO 9001 Quality Management scheme with all locations having either System 2+ or 4 levels of attestation of conformity as appropriate.

Key features & benefits
  • ·Strong and durable to meet the demands of the civil engineering environment
  • ·Specified under Transport Infrastructure Ireland and 13242 of S.R. 21
  • ·Available in a range of sizes and gradings
  • ·Made from local materials manufactured to the highest standards
  • ·Large volumes can be accommodated
  • ·Production managed under ISO 9001 Quality Management scheme
Technical specification
  • ·EN 13242 Aggregates for Unbound and Hydraulically Bound Materials (S.R. 21)
  • ·EN 13285 Unbound Mixtures Specification
  • ·TII Specification for Road Works
LEARN - Roadstone online seminars
Quarry operation & material standards

Discover how stone is produced from Roadstone quarries and get an understanding of material properties, standards and specifications.

Enroll now
photo of foundation
Resources
MSDS Natural aggregates Download PDF
S.R.21 Annex E:2016 Technical Brochure Download PDF
FAQ
What is SR 21? SR 21 is a document listing the Irish Standard Recommendations on the use of the European Standard EN 13242. The document gives guidance on the best options to choose for specific engineering applications.
What is Annex E? Annex E is a section of SR 21 which deals specifically with guidance on specifying aggregate properties for granular fill for use under concrete floors or footpaths.
When did SR 21 revision come into effect? In March of 2016 the NSAI published the revised draft of S.R. 21. From date of publication the Standard becomes the only specification that should be used for granular materials to be used under concrete floors and footpaths
What is the documents full description/title? SR 21: Guidance on the use of I.S. EN 13242:2013 – Aggregates for unbound and hydraulically bound materials for use in civil engineering work and road construction.
What new materials are covered in Annex E? T.0 Struc 0-125mm Structural Layer for depths in excess 900mm
T.1 Struc 0/31.5mm (Crushed Rock) Structural Layer for depths less than 900mm
T.1 Struc 0/40mm (Crushed Gravel) Structural Layer for depths less than 900mm
T.2 Perm 4/40mm Gas Permeable Layer
T.3 Blind 0/4mm Blinding Layer
Where are these materials used? ANNEX E MATERIALS
T.0 Struc Unbound Granular Fill material is recommended for use where the fill material will be subject to substantial loading and /or dynamic loading, or the depth of fill is greater than 900 mm to the top of the subsoil.
T.1 Struc 0/31.5 Unbound Granular Fill (Crushed Rock) or 0/40mm Crushed Gravel is recommended for use where the overall depth of fill to subsoil is less than 900mm.
T.2 Perm 4/40mm Gas Permeable Layer is recommended in any building where a Radon Sump is to be operational in the sub-floor including all occupied new build projects, i.e. anywhere a person might be for work, leisure or residence.
T.3 Blind 0/4mm Blinding Layer is used when blinding the top surface of the T.2 Permeable material to ensure the radon barrier is not punctured and there is a level surface upon which to place the insulation and pour the concrete.
Are other materials suitable for under concrete floors and footpaths? Annex E materials are the only materials that should be specified for use under concrete floors and footpaths
Who is responsible for ensuring Granular Fill SR 21 Annex E:2016 is used? It is the sole responsibility of the customer/site contractor to establish a system of traceability to ensure the correct material is used in the correct application.
How can it be traced back that the correct material was used? IS 888 “Code of Practice for the procurement and use of unbound granular fill hardcore material for use under concrete floors” has also been published by the NSAI. This document covers all aspects of ordering, delivery, placement and traceability that may be required by the material user and specifier.
What are the Roadstone product descriptions and product codes? S.R 21 Annex E, T.0 Structural (0/125mm) 1152112
S.R 21 Annex E, T.1 Structural (0/31.5mm) 1152017
S.R 21 Annex E, T.1 Structural (0/40mm) 1465030
S.R 21 Annex E, T.2 Permeable (4/40mm) 1152111
S.R 21 Annex E, T.3.Blinding (0/4mm) 1570040
What Roadstone locations can supply this product? We are happy to confirm that all relevant Roadstone Ltd quarry locations have been inspected and tested and found to be in full compliance with S.R 21, and all other S.R’s such as S.R 16 Aggregates for Concrete S.R 17 Aggregates for Bituminous Mixtures and Surface Treatments S.R 18 Aggregates for Mortar
What level of attestation is required under Annex E of SR 21? The system of attestation and verification of performance has changed from System 4 (self-certification) to System 2+ (independent certification) for this particular end use aggregate. Annex E alone cannot be assessed for certification as only harmonized European Standards can be assessed for CE marking of Systems of Factory Production Control so all accreditation will be to EN 13242 Aggregates for Unbound and Hydraulically Bound Materials. Roadstone Ltd have a long and successful history of supplying a wide range of building materials to the Irish construction industry with no issues relating to pyritic heave or swelling.
Case studies
Related products